Wire the Outdoor Lighting by Yourself

Purpose 

There are many reasons for having Outdoor lighting near the house and the biggest reason is the security.  If the surrounding of your house is well lighted then it will discourage the burglar to enter into the premises. At the same time proper lighting on the outside will also add to the elegance of the house. 

Activities

If you are planning to wire the lighting all by yourself then you can find it quite interesting too. The wiring work for lighting at outdoor location may not be as complicated as wiring of Chandeliers. If you have ever seen how Bathroom Lighting is done then you can surely do this simple project by yourself. Here are a few things that you need to do to complete the job decently.   Let us start with a simple lighting project for your lawn. 

Before you start the job you must remember that the wiring of lights may create lots of mess in the compound and hence it is necessary to create a trench in order to conceal the wiring. However, you must make sure to inform the Utility companies about the location of the buried cables. 

To start with, decide the location of your lights. Having marked all the locations of the light you must make the planning for the circuit. It is always better to consider parallel circuit. In that case you need not search for the wiring loop if one of the lights ever fails to work. Your trouble shooting exercise will be pretty simple in case of parallel connections. 

If your wires are well insulated cables then you can consider of digging the trench and bury them. The trench must be at least 2 feet deep. For better protection of cables you may use conduit pipes and let all the underground cables remain inside the pipe. However, if the insulation of the cable is pretty good then you may avoid using the conduit pipes so that you can make some cut in your project cost. 

Now lay the wires inside the trench and cut them at appropriate location where you are going to locate your Outdoor lighting. You must leave enough excess wire for wiring of the lights. Connect all the cut wire to the respective fixtures of the light. Wilmette Lighting can be a good choice for your lawn and you may choose a suitable one based on the décor of the location and your taste. 

Finally join all the end of the wires- like the line, neutral and ground points separately and create a junction box. Maintain the same color code example for line - black, for neutral - white and green for ground connection. Now in order to keep all the lights on the same circuit the common points of all the three wires must be joined together along with a single switch and you are done with the wiring.

Give a perfect look:

If you are placing the Outdoor lighting posts in your lawn then you can consider using any traditional stained glass, which may give a perfect look to your outdoor space. You may also get many compliments from your neighbors and friends for doing a decent job all by yourself.

Various Ideas about Bathroom Lighting

Bathroom is a place where every member of the house will spend some time with himself and therefore proper Bathroom Lighting is essential in this important location of your home. This can be accomplished successfully by selecting the correct lamps, placing them tactically, using defoggers and mirrors at the right places and in apt styles. 

Many people do not attach much importance regarding the lighting of this place when compared to their living room or the bed rooms, but this place is also equally important part of the house where proper lighting is very essential. 

Usually in most of the houses, bathrooms have very limited amount of space and hence there is very little scope of any natural lighting available over here. Therefore electric lighting source is the only means of obtaining light in this area. Looking at the need of the bathroom, the lighting in this area must be more prominent than any other place.

Different lighting ideas:

In case of small bathrooms, it is possible to obtain good lighting by using two Wall Sconces placed on either side of the mirror, while for larger sized bathrooms proper illumination can be obtained by fixing Picture Lights on the ceiling. However it is very important to consider about the safety aspects against electric shock while considering about Bathroom Lighting, which is more important than the aesthetics and decor of the bathroom. 

Another important issue that has to be considered while selecting the bathroom fixture is the generation of water vapor and its contact with the hot bulb of the light. This kind of problem can be avoided by using fixtures with spot type lights and this offers safety too. There is vast range of Outdoor lighting fixtures available from where spot type light can be chosen.

In general the lighting in bathroom must meet three essential conditions, it must be aesthetic, functional, and provide the required environment. You will need bright light during routine tasks like shaving etc, whereas discreet light is sufficient during relaxation moment like when you are in a bathtub. The bulbs chosen should provide enough light that is needed in the room. Therefore you must use the fixtures for lights which can be as fancy as you like, but must be flexible enough to get directed as you like. 

You may be able to direct the light in dark areas if needed and you can use the mirror too to reflect the light by locating the position of lights at some strategic places.  All these arrangement can help you to get brighter or dimmer light as and when needed to create a suitable environment.  

The Bathroom Lighting must be quite clear and its intensity must be controlled.  Your selected lighting fixtures must work in tandem with your furnishing items and other decorative items fixed in the bathroom. If you are looking forward to having a classic bathroom then it must have a mirror with very graceful frame and shaded lights. In most modern bathrooms, mirrors are usually without frames and the spots are so placed that lights should not get too bright.

Decorate With Wrought Iron Lighting

Application of Wrought iron

Any lighting fixtures made out of wrought iron can always give very classy and rustic look to any type of interior.  These kinds of Wrought Iron Lighting fixtures are usually made out of carbonized steel and are customized with manual work. Some of the products that are generated with lots of manual work are iron lamps, ceiling light fixtures, chandeliers and many Outdoor lighting. Lighting products made out of such materials are known for their strength, quality and durability. They are quite suitable for outdoor environment. This is the best option for classy lighting and is an evergreen choice for outside decor. 

Wrought iron materials have been used in making of lamps and lighting systems of different varieties and styles.  There are few typical examples available in places like Spain where you can find hanging tasseled lamps, in France where you can find Art Deco pieces; where wrought iron has been one of the main component for lamp making and for centuries they are being used. You may be having your own style of decorating, but these iron fixtures will be durable and graceful. These light fixtures can illuminate your home for many long years to come.  

Evergreen material

Although many people may think that wrought iron is usually connected with grand old thinking and of antique style, but even in many modern houses which are decorated on a contemporary theme, wrought iron can give an absolutely stunning look. However at the same time the lighting design has to be chosen properly so as to make sure that it blends well with all other interiors.

As an example you cannot place lamps of Victorian style in any modern home. In such kind of location you may choose any rustic and yet a new style of light fixture, so that it harmonizes with the other items of home decor. From various online sources you can find large number of light fixtures made out of wrought iron which are very attractive, modern and elegant in look.  You can get a wrought iron  light fitting for your bed room or for living room, or select some bathroom lighting or for your garden.  In the market various brands like Minka Aire or Fanimation offer many such lamps made out of this material.  

You can find a range of choices while shopping for these lights. Moreover, you can get many well known branded products also and choose the best one for your home. 

Usually these light fittings are not purchased very frequently and they remain a lifelong asset as very rarely they go out of latest fashion. Therefore if you can buy a good quality of branded item then you can use it for very long time. It is always a good idea to invest a little more money and buy the best available product. Even if you have any budget constraint you can get plenty of stylish Wrought Iron Lighting in the market to illuminate your house making it look stylish and ethnic at the same time.